FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

Price: $75.99
(as of Mar 26,2022 00:40:59 UTC – Details)

Product Description

Pneumatic/Manual Oil Changer

Instruction

Step 1 .Preparatory Work

The operating temperature is between 35 ° F and 200 ° F. Cool down the engine at least 15 minutes after driving.
If the car has not been used in the past 4 hours, preheat for at least 3 minutes before extraction.

Step 2 .Install The Tube

Remove the cylinder cover, select a suitable tube to insert.
If the hose is not long enough, connect an extension tube to the main tube, until it reaches the bottom of the oil pan.

Step 3 .Extract Oil

Pneumatic: Connect the 1/4″ NPT quick coupler to the air compressor. Set the the operating pressure between 40-170 psi.
Manual: Pump the fluid extractor with your hands. Get the job done anywhere and anytime.
Make sure the tubes are connected tightly before extracting.

Step 4 .Pour Out The Oil

Press the decompression valve to release the negative pressure. Remove the hose clockwise.
Pour out the used fluid to another container and take it to the nearby disposal center for recycling.

WARNING

Do not extract the oil over the limit line on the tank, the bottom line helps prevent any spilling.
If the fluid goes over the limit line, it might flow into the vacuum chamber and cause leaking from bottom.
Noted that the fluid should not be over the limit line while pouring.

Features

Long Enough to Reach the Bottom

Extend the main tube by connecting with extension tube to reach the bottom of the reservoir, suck up every drop of oil.

Iron Wire Make it Easier to Operate

Insert the wire dipstick into the tube, hold up the soft hose strongly.

1/4” Air Inlet

Connect to the air compressor, save effort and provide higher efficiency.

【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.
【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers.