KAOLALI Car Head Up Display Digital HUD OBD2 GPS Speedometer Dual System Display Smart Gauge MPH Over Speed Alarm Odometer

Price: $34.99
(as of Mar 29,2022 03:15:53 UTC – Details)

Product Specification:
Material: ABS
Colour: black
System: OBD+GPS
Screen size: 2 inches LCD
Screen resolution: 240*240
Bare metal size: about 9.7*6.1*4.9cm/3.82*2.40*1.93inch
Bare metal weight: about 40g
Line length: 175cm/68.90in

Features:
1. OBD+GPS dual system.
2. Two installation methods: A-pillar-trim install or put on the dashboard.
3. The first screen can rotate 270 degrees.
4. The first HUD small code table reaches the highest resolution of 240*240 for high-definition display.
5. There are three types of turbine pressure: PSI, 100KPA, bar. The turbine value can be adjusted and calibrated to increase the fuel consumption unit KM/L.
6. Up to 10 Hz refresh rate, no stall delay phenomenon.
7. The GPS function can be displayed at the same time in the OBD mode, which is currently the first in the industry. When the speed is switched to MPH per mile, the water temperature will be automatically switched to Fahrenheit degrees, the single driving distance will also be automatically switched to Miles, and the fuel consumption will also be automatically switched to gallons MPG.
8. 8 kinds of display screens can be switched.
9. GPS mode: speed per hour, altitude, number of satellites, clock, mileage of per trip, time of per trip, compass.

Please Note：
1.Please comfirm whether your car supports OBD2 protocol before order!
2.It is generally suitable for models after 2012. If you are not sure whether you car fit for this product,just contact us before you purchase.
3.Not for electric vehicle
How to install?
1.Turn the ignition off, connect the OBD cable to vehicle OBD2 interface
2.Connect the OBD cable to the OBD interface on smart gauge
3.Hide the OBD cable in a-pillar,turn the ignition on, then it can work

Package Included:
1 x OBD+GPS Gauge
1 x OBD Cable
1 x Hook and Loop
1 x English Manual
OBD+GPS DUAL SYSTEM: The car head up display adopts OBD and GPS modes. Built-in GPS module head-up display is more compatible than traditional HUD with OBD only, can be suitable for all cars, when your car does not has OBD, you can switch to GPS working Mode. In the OBD mode, GPS function can be displayed at the same time.
RICH DATA DISPLAY INTERFACE: Multifunctional cars digital meter can switch 8 kinds of interfaces, it can present a simple interface, a speed interface, an OBD interface, a 6-grid interface, a scroll pressure interface, an acceleration test interface, a brake test interface, and a full-function interface.
FUNCTION FOR OBD2 MODE: Speed, RPM, water temperature, voltage, fuel consumption, clock, single travel distance, single travel time, oil temperature, turbine pressure, acceleration test, brake test, overspeed alarm, engine failure alarm, elimination of fault code, water temperature alarm , speed alarm, voltage alarm, mile switch, fatigue driving reminder, automatic and manual brightness adjustment.
TWO INSTALLATION METHODS: This installation methods of the digital GPS speedometer are simple and diverse. You can place it directly in front of the car’s center console, or use the tape that comes with to tie it to the car. The smart gauge connects to the vehicle via OBD cable, plug and play, can display speed, water temperature, voltage, fuel consumption, clock, distance travelled per trip, time travelled per trip, oil.
CLEAR SCREEN: This Car HUD Display has a big screen,it can HD display, works perfect under sunshine or at night. It displays car driving data on the front windshield, avoids the danger of drivers looking down at the dashboard and helps drivers to keep the best status on the way.